Journal of Applied and Computational Mechanics

Author Index

A

  • Abdali, Sajad H. Automatic Structural Synthesis of Planetary Geared Mechanisms ‎using Graph Theory [Volume 9, Issue 2, 2023, Pages 384-403]
  • Abd Elazem, Nader Y. Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a ‎Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
  • Abd Hamid, Fatin Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
  • Abedanzadeh, Amir Economic Evaluation of Supplying Commercial Thermal Load by ‎a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
  • Abo-bakr, Rasha M. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
  • Aboutalebi, Mohammad Numerical Study on the Ferrofluid Droplet Splitting in a T-junction ‎with Branches of Unequal Widths using Asymmetric Magnetic Field‎ [Volume 9, Issue 2, 2023, Pages 357-370]
  • Abtahi Mehrjardi, Seyed Ali Heat Transfer Improvement in a Thermal Energy Storage System ‎using Auxiliary Fluid Instead of Nano-PCM in an Inclined ‎Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
  • Adelaja, Adekunle Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
  • Agarwal, Ravi P. A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
  • Ahmadi Nadooshan, Afshin Power Law Nanofluid through Tapered Artery based on a ‎Consistent Couple Stress Theory [Volume 9, Issue 3, 2023, Pages 623-636]
  • Akgöz, Bekir A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
  • Al-Chlaihawi, Murtadha J. Bifurcation of Fiber-Reinforced Cylindrical Membranes under ‎Extension, Inflation, and Swelling [Volume 9, Issue 1, 2023, Pages 113-128]
  • Al Dulaimi, Zaid M. Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid ‎Nanofluid Natural Convection in a Partially Layered Porous ‎Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
  • Aleksandrov, A.Yu. Natural Magneto-velocity Coordinate System for Satellite ‎Attitude Stabilization: Dynamics and Stability Analysis [Volume 9, Issue 2, 2023, Pages 513-520]
  • Al-Griffi, Takia Ahmed J. Analytical Investigations for the Joint Impacts of Electro-osmotic and Some Relevant Parameters to Blood Flow in Mildly Stenosis Artery [Volume 9, Issue 1, 2023, Pages 274-293]
  • Ali, Zeeshan Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
  • Alizadeh Kharkeshi, Behrad Numerical Study of the Hydrodynamic Behavior of an Archimedes Screw Turbine by Experimental Data in order to Optimize Turbine Performance: The Genetic Algorithm [Volume 9, Issue 4, 2023, Pages 1060-1075]
  • Alnemrawi, Bara’a R. Prediction of Interface Shear Strength of Heat Damaged Shear-keys using Nonlinear Finite Element Analysis [Volume 9, Issue 4, 2023, Pages 1000-1015]
  • Al-Rousan, Rajai Z. Prediction of Interface Shear Strength of Heat Damaged Shear-keys using Nonlinear Finite Element Analysis [Volume 9, Issue 4, 2023, Pages 1000-1015]
  • Al-Saif, Abdul-Sattar J. Analytical Investigations for the Joint Impacts of Electro-osmotic and Some Relevant Parameters to Blood Flow in Mildly Stenosis Artery [Volume 9, Issue 1, 2023, Pages 274-293]
  • Alsakarneh, Amjad Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
  • Alvarez, Luis F. A Reduced-Order Simulation Methodology for Nanosecond-Pulsed Plasmas in a Backward-Facing ‎Step Supersonic Combustor Configuration [Volume 9, Issue 1, 2023, Pages 181-194]
  • Amaral, Rodrigo Reis A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
  • Amiri Delouei, Amin Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
  • Amiri Delouei, Amin An Exact Analytical Solution for Heat Conduction in a ‎Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
  • Analooee, Ali Time Distance: A Novel Collision Prediction and Path Planning Method [Volume 9, Issue 3, 2023, Pages 656-677]
  • Antonov, Dmitrii V. ‎2D Planar Simulation of Collisions between Liquid Droplets and ‎Solid Particles in a Gas [Volume 9, Issue 3, 2023, Pages 678-694]
  • Ashorynejad, Hamid Reza Temperature Effect on Moving Water Droplets at the Channel of ‎PEMFC by Multi-component Multiphase Lattice Boltzmann Method [Volume 9, Issue 3, 2023, Pages 607-622]
  • Askin, Mustafa Yunus Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
  • Assie, Amr E. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
  • Awrejcewicz, Jan Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
  • Azadi, Shahram A Novel Flexible Lane Changing (FLC) Method in Complicated ‎Dynamic Environment for Automated Vehicles [Volume 9, Issue 2, 2023, Pages 318-331]
  • Azadi, Shahram Time Distance: A Novel Collision Prediction and Path Planning Method [Volume 9, Issue 3, 2023, Pages 656-677]
  • Azimi, Amir H. A Note on the Discharge over Full-width Rectangular Sharp-‎crested Weirs and Weirs of Finite Crest Length‎ [Volume 9, Issue 2, 2023, Pages 458-463]

B

  • Babanli, Mustafa Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
  • Bahoosh, Reza Numerical Simulations of Spoiler’s Effect on a Hatchback and a ‎Sedan Car Exposed to Crosswind Effect‎ [Volume 9, Issue 2, 2023, Pages 346-356]
  • Bahroun, Zied Smart Gas Sensors: Materials, Technologies, Practical ‎Applications, and Use of Machine Learning – A Review [Volume 9, Issue 3, 2023, Pages 775-803]
  • Barrett, John Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
  • Bassir, David A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]
  • Batista, Clauderino da Silva Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
  • Behbahaninia, Ali A New Approach for Exergoeconomics Evaluation by Considering ‎Uncertainty with Monte Carlo Method [Volume 9, Issue 1, 2023, Pages 15-24]
  • Bien, Duong Xuan Investigation of Driving Torques at the Joints of Industrial ‎Robot Arms based on the Topology Optimization Technique [Volume 9, Issue 3, 2023, Pages 820-833]
  • Borges, Julian Alves A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
  • Borgheipour, Hasti Economic Evaluation of Supplying Commercial Thermal Load by ‎a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
  • Borzenko, Evgeny I. Flow Structure when Filling a Channel with a Curable Liquid [Volume 9, Issue 1, 2023, Pages 195-204]
  • Bureerat, Sujin Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]

C

  • Califano, Filippo A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
  • Califano, Filippo A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
  • Campos, Damián Federico Self-damping of Optical Ground Wire‎ Cables: A Bayesian Approach [Volume 9, Issue 1, 2023, Pages 205-216]
  • Casas, Walter Jesus Paucar A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
  • Ceballos Zuluaga, Jorge Mario Fluid-dynamic Simulations for Assessment of Dimensioning ‎Methodologies of Pelton Turbine Buckets Considering the Initial ‎Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
  • Chamkha, Ali J. Heat Transfer Improvement in a Thermal Energy Storage System ‎using Auxiliary Fluid Instead of Nano-PCM in an Inclined ‎Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
  • Chen, Gongfa A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]
  • Chhabra, Vishal Effect of Magnetic Field on Viscous Flow through Composite ‎Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
  • Chouaf, Abdelkerim Comparative Study of the Spectral Method, DISPERSE and Other ‎Classical Methods for Plotting the Dispersion Curves in ‎Anisotropic Plates [Volume 9, Issue 4, 2023, Pages 955-973]
  • Civalek, Ömer A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
  • Concli, Franco Numerical Modeling of Fluid’s Aeration: Analysis of the Power ‎Losses and Lubricant Distribution in Gearboxes [Volume 9, Issue 1, 2023, Pages 83-94]
  • Cui, Fangsen A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]

D

  • Dastjerdi, Shahriar A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
  • Demirkoparan, Hasan Bifurcation of Fiber-Reinforced Cylindrical Membranes under ‎Extension, Inflation, and Swelling [Volume 9, Issue 1, 2023, Pages 113-128]
  • Djermane, Mohamed Numerical Study of the Dynamic Response of Elevated Steel ‎Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
  • Do, Thanh Binh Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based ‎on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
  • Dongbang, Watcharin Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]

E

  • Ebrahimzadeh Azghadi, Fahimeh Performance Investigation of Simple Low-dissipation AUSM ‎‎(SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam ‎Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
  • ECER, Safiye An Alternative Procedure for Longitudinal Vibration Analysis of ‎Bars with Arbitrary Boundary Conditions [Volume 9, Issue 1, 2023, Pages 294-301]
  • Efendiyeva, Sadige P. Buckling Behavior of Nanocomposite Plates with Functionally ‎Graded Properties under Compressive Loads in Elastic and ‎Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
  • Elagamy, Khaled Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a ‎Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
  • El Amraoui, Rachid Numerical Investigation into the Effects of Orientation on ‎Subcooled Flow Boiling Characteristics [Volume 9, Issue 2, 2023, Pages 464-474]
  • Elgazery, Nasser S. Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a ‎Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
  • EL Mghari, Hicham Numerical Investigation into the Effects of Orientation on ‎Subcooled Flow Boiling Characteristics [Volume 9, Issue 2, 2023, Pages 464-474]
  • Eltaher, Mohamed A. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
  • Emamian, Amin An Exact Analytical Solution for Heat Conduction in a ‎Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
  • Eremeyev, Victor A. A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
  • Ershkov, Sergey Exact Solutions for Isobaric Inhomogeneous Couette Flows of a ‎Vertically Swirling Fluid [Volume 9, Issue 2, 2023, Pages 521-528]
  • Esmail, Essam L. Automatic Structural Synthesis of Planetary Geared Mechanisms ‎using Graph Theory [Volume 9, Issue 2, 2023, Pages 384-403]

F

  • Fakouriyan, Samaneh Economic Evaluation of Supplying Commercial Thermal Load by ‎a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
  • Fantuzzi, Nicholas Buckling Behavior of Nanocomposite Plates with Functionally ‎Graded Properties under Compressive Loads in Elastic and ‎Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
  • Fedorenko, Roman M. ‎2D Planar Simulation of Collisions between Liquid Droplets and ‎Solid Particles in a Gas [Volume 9, Issue 3, 2023, Pages 678-694]
  • Ferrer-Fuenmayor, Samuel Shape Optimization of Slotted Steel Plate Dampers using the ‎Simulated Annealing Algorithm [Volume 9, Issue 3, 2023, Pages 870-883]
  • Filimonov, S.A. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
  • Fischer, Szabolcs Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]

G

  • Ghobadi, Moslem Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
  • Ghommem, Mehdi Smart Gas Sensors: Materials, Technologies, Practical ‎Applications, and Use of Machine Learning – A Review [Volume 9, Issue 3, 2023, Pages 775-803]
  • Gomes, Herbert Martins A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
  • Guida, Domenico Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
  • Guida, Domenico A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
  • Guida, Domenico A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
  • Gurbanov, Nurlan Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
  • Gutierrez, Albio D. A Reduced-Order Simulation Methodology for Nanosecond-Pulsed Plasmas in a Backward-Facing ‎Step Supersonic Combustor Configuration [Volume 9, Issue 1, 2023, Pages 181-194]
  • Guzei, D.V. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]

H

  • Hadj Djelloul, Nasser Dine Numerical Study of the Dynamic Response of Elevated Steel ‎Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
  • Hao, Le Van Bernoulli-Euler Beam Unsteady Bending Model with ‎Consideration of Heat and Mass Transfer [Volume 9, Issue 1, 2023, Pages 168-180]
  • Harish, Modalavalasa A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
  • He, Ji-Huan Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a ‎Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
  • He, Ji-Huan A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
  • Hedayati, Ali Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
  • Hosseini, Kamyar Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]

I

  • Ibrahim, Shaik Mohammed A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
  • Igaadi, Amal Numerical Investigation into the Effects of Orientation on ‎Subcooled Flow Boiling Characteristics [Volume 9, Issue 2, 2023, Pages 464-474]
  • Indeitsev, Dmitry Hemispherical Resonator of a Rate-integrating Gyroscope: A ‎Novel Method for Determination of Eigenfrequencies and ‎Eigenforms in Presence of Imperfections‎ [Volume 9, Issue 4, 2023, Pages 915-925]
  • Ipek, Cengiz Vibration Analysis of Shear Deformable Cylindrical Shells Made ‎of Heterogeneous Anisotropic Material with Clamped Edges [Volume 9, Issue 3, 2023, Pages 861-869]
  • Ipek, Cengiz Buckling Behavior of Nanocomposite Plates with Functionally ‎Graded Properties under Compressive Loads in Elastic and ‎Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
  • Isaza Merino, Cesar Augusto Fluid-dynamic Simulations for Assessment of Dimensioning ‎Methodologies of Pelton Turbine Buckets Considering the Initial ‎Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
  • Ismayilov, Mahmud Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
  • Isoldi, Liércio André A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
  • Ivanov, Vladimir Matrix Equations of the Motion of Multibody Systems with a Tree Structure in Hamiltonian Variables [Volume 9, Issue 4, 2023, Pages 1107-1121]

J

  • Jahanian, Omid Potential of Semi-Empirical Heat Transfer Models in Predicting ‎the Effects of Equivalence Ratio on Low Temperature Reaction ‎and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
  • Jalali, Ali Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
  • Javaherdeh, Kourosh Temperature Effect on Moving Water Droplets at the Channel of ‎PEMFC by Multi-component Multiphase Lattice Boltzmann Method [Volume 9, Issue 3, 2023, Pages 607-622]
  • Jerves, Alex X. A Nonlinear Lagrangian Model for Plane Frames Pre-design [Volume 9, Issue 3, 2023, Pages 884-899]

K

  • Kadhim, Hakim T. Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid ‎Nanofluid Natural Convection in a Partially Layered Porous ‎Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
  • KADIOĞLU, Fethi An Alternative Procedure for Longitudinal Vibration Analysis of ‎Bars with Arbitrary Boundary Conditions [Volume 9, Issue 1, 2023, Pages 294-301]
  • Karami, Fatemeh Power Law Nanofluid through Tapered Artery based on a ‎Consistent Couple Stress Theory [Volume 9, Issue 3, 2023, Pages 623-636]
  • Kari, Mohammadreza Calculation of Backscattered Ultrasonic Waves Field from a ‎Copper-clad Steel Rod Immersing in Water and Effect of Clad ‎Corrosion and Interfacial Disbond between Clad and Rod Defects ‎on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
  • Karimnejad, Sajjad An Exact Analytical Solution for Heat Conduction in a ‎Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
  • Karpov, Alexander I. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
  • Karskanov, Sergey A. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
  • Kazemi, Reza Time Distance: A Novel Collision Prediction and Path Planning Method [Volume 9, Issue 3, 2023, Pages 656-677]
  • Kazemzadeh Hannani, Siamak Numerical Study on the Ferrofluid Droplet Splitting in a T-junction ‎with Branches of Unequal Widths using Asymmetric Magnetic Field‎ [Volume 9, Issue 2, 2023, Pages 357-370]
  • Kelly, Ger Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
  • Khademi, Alireza Heat Transfer Improvement in a Thermal Energy Storage System ‎using Auxiliary Fluid Instead of Nano-PCM in an Inclined ‎Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
  • Khajezade Roodi, Mostafa Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
  • Khodadadi, Touraj‎ Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
  • Kiarasi, Faraz Numerical and Experimental Investigation on Post-buckling ‎Behavior of Stiffened Cylindrical Shells with Cutout subject to ‎Uniform Axial Compression [Volume 9, Issue 1, 2023, Pages 25-44]
  • Kocsis Szürke, Szabolcs Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
  • Kopp, Michael I. The Impact of Marangoni Convection and Radiation on Flow of ‎Ternary Nanofluid in a Porous Medium with Mass Transpiration [Volume 9, Issue 2, 2023, Pages 487-497]
  • Korolev, Stanislav A. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
  • Kovács, Gábor Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
  • Kumar, Parthi Vijaya A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
  • Kumar, Sumit Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
  • Kundu, Prabir Kumar Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
  • Kurpa, Lidiya Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]

L

  • Lamba, Navneet Kumar Impact of Memory-dependent Response of a Thermoelastic Thick Solid Cylinder [Volume 9, Issue 4, 2023, Pages 1135-1143]
  • La Regina, Rosario Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
  • Leonelli, Luca Driveline Stability in Racing Motorcycles: Analysis of a Three ‎Degrees of Freedom Minimal Model [Volume 9, Issue 2, 2023, Pages 404-418]
  • Leshchenko, Dmytro Exact Solutions for Isobaric Inhomogeneous Couette Flows of a ‎Vertically Swirling Fluid [Volume 9, Issue 2, 2023, Pages 521-528]
  • Li, Xiaochuan Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
  • Li, Yueming An Exact Analytical Solution for Heat Conduction in a ‎Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
  • Lipanov, Alexey M. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
  • Liu, Jianxing Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
  • Lok, Sefika Ipek A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
  • Lok, Sefika Ipek A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
  • Lorenzini, Giulio A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
  • Löser, Enrique Eduardo Self-damping of Optical Ground Wire‎ Cables: A Bayesian Approach [Volume 9, Issue 1, 2023, Pages 205-216]
  • Lukin, Alexei Hemispherical Resonator of a Rate-integrating Gyroscope: A ‎Novel Method for Determination of Eigenfrequencies and ‎Eigenforms in Presence of Imperfections‎ [Volume 9, Issue 4, 2023, Pages 915-925]
  • Luo, Robert Keqi Multimode Fatigue Criteria for Filled Non-crystalizing Rubber ‎under Positive R Ratios [Volume 9, Issue 4, 2023, Pages 1049-1059]

M

  • Macêdo, Emanuel Negrão Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
  • Mahabaleshwar, Ulavathi S. The Impact of Marangoni Convection and Radiation on Flow of ‎Ternary Nanofluid in a Porous Medium with Mass Transpiration [Volume 9, Issue 2, 2023, Pages 487-497]
  • Mahdavian, Mohammad Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
  • Mahmood, Lubna Smart Gas Sensors: Materials, Technologies, Practical ‎Applications, and Use of Machine Learning – A Review [Volume 9, Issue 3, 2023, Pages 775-803]
  • Mahmoudi, Jafar CFD Analyses and Comparison of the Effect of Industrial Heat ‎Sinks in Subsea Control System (SCS)‎ [Volume 9, Issue 1, 2023, Pages 95-112]
  • Mahpeykar, Mohammad Reza Performance Investigation of Simple Low-dissipation AUSM ‎‎(SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam ‎Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
  • Malikan, Mohammad A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
  • Maranna, Thippaiah The Impact of Marangoni Convection and Radiation on Flow of ‎Ternary Nanofluid in a Porous Medium with Mass Transpiration [Volume 9, Issue 2, 2023, Pages 487-497]
  • Mastrone, Marco Nicola Numerical Modeling of Fluid’s Aeration: Analysis of the Power ‎Losses and Lubricant Distribution in Gearboxes [Volume 9, Issue 1, 2023, Pages 83-94]
  • Mba, David Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
  • Medina, David A. A Nonlinear Lagrangian Model for Plane Frames Pre-design [Volume 9, Issue 3, 2023, Pages 884-899]
  • Mehtiyev, Rafail Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
  • Melnikov, Andrey Stability Analysis of an Inflated, Axially Extended, Residually Stressed Circular Cylindrical Tube [Volume 9, Issue 3, 2023, Pages 834-847]
  • Merodio, Jose Stability Analysis of an Inflated, Axially Extended, Residually Stressed Circular Cylindrical Tube [Volume 9, Issue 3, 2023, Pages 834-847]
  • Merodio, José Bifurcation of Fiber-Reinforced Cylindrical Membranes under ‎Extension, Inflation, and Swelling [Volume 9, Issue 1, 2023, Pages 113-128]
  • Minakov, A.V. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
  • Miroshnichenko, Igor V. Influence of Thermal Radiation on Heat Transfer through a ‎Hollow Block [Volume 9, Issue 2, 2023, Pages 419-429]
  • Mishra, Shweta Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
  • Miyagawa, Helder Kiyoshi Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
  • Mohamed, Salwa M. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
  • Momen, Mahyar A New Approach for Exergoeconomics Evaluation by Considering ‎Uncertainty with Monte Carlo Method [Volume 9, Issue 1, 2023, Pages 15-24]
  • Mondal, Hiranmoy Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
  • Morachkovska, Iryna Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
  • Morales Rojas, Andrés David Fluid-dynamic Simulations for Assessment of Dimensioning ‎Methodologies of Pelton Turbine Buckets Considering the Initial ‎Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
  • Mosalmani, Reza Stress-driven Approach to Vibrational Analysis of FGM Annular ‎Nano-plate based on First-order Shear Deformation Plate Theory [Volume 9, Issue 3, 2023, Pages 637-655]
  • Moslemi, Mehdi Temperature Effect on Moving Water Droplets at the Channel of ‎PEMFC by Multi-component Multiphase Lattice Boltzmann Method [Volume 9, Issue 3, 2023, Pages 607-622]
  • Musiket, Kamtornkiat Accuracy and Convergence Rate Comparative Investigation on ‎Polytope Smoothed and Scaled Boundary Finite Element [Volume 9, Issue 1, 2023, Pages 226-238]
  • Muthu, P. Mathematical Model of Fluid Flow and Solute Transport in ‎Converging-diverging Permeable Tubes [Volume 9, Issue 4, 2023, Pages 900-914]

N

  • Nafeh, Hind A. Automatic Structural Synthesis of Planetary Geared Mechanisms ‎using Graph Theory [Volume 9, Issue 2, 2023, Pages 384-403]
  • Nasedkin, Andrey Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based ‎on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
  • Nishad, Chandra Shekhar Effect of Magnetic Field on Viscous Flow through Composite ‎Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
  • Noormohammadi Arani, Omid Calculation of Backscattered Ultrasonic Waves Field from a ‎Copper-clad Steel Rod Immersing in Water and Effect of Clad ‎Corrosion and Interfacial Disbond between Clad and Rod Defects ‎on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
  • Nuantong, Weerapon Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]

O

  • Oganesyan, Pavel Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based ‎on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
  • Ogundare, Adebayo A. Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
  • Ojolo, Sunday J. Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
  • Orlande, Helcio Rangel Barreto Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]

P

  • Pandit, Biswajit A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
  • Pappalardo, Carmine Maria Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
  • Pappalardo, Carmine Maria A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
  • Pappalardo, Carmine Maria A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
  • PasandidehFard, Mahmoud Performance Investigation of Simple Low-dissipation AUSM ‎‎(SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam ‎Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
  • Patiño Arcila, Iván David Fluid-dynamic Simulations for Assessment of Dimensioning ‎Methodologies of Pelton Turbine Buckets Considering the Initial ‎Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
  • Pholdee, Nantiwat Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
  • Phungpaingam, Boonchai Accuracy and Convergence Rate Comparative Investigation on ‎Polytope Smoothed and Scaled Boundary Finite Element [Volume 9, Issue 1, 2023, Pages 226-238]
  • Piovan, Marcelo Tulio Self-damping of Optical Ground Wire‎ Cables: A Bayesian Approach [Volume 9, Issue 1, 2023, Pages 205-216]
  • Piyaphipat, Suthee Accuracy and Convergence Rate Comparative Investigation on ‎Polytope Smoothed and Scaled Boundary Finite Element [Volume 9, Issue 1, 2023, Pages 226-238]
  • Popov, Ivan Hemispherical Resonator of a Rate-integrating Gyroscope: A ‎Novel Method for Determination of Eigenfrequencies and ‎Eigenforms in Presence of Imperfections‎ [Volume 9, Issue 4, 2023, Pages 915-925]
  • Prosviryakov, Evgenii Exact Solutions for Isobaric Inhomogeneous Couette Flows of a ‎Vertically Swirling Fluid [Volume 9, Issue 2, 2023, Pages 521-528]
  • Pryazhnikov, A.I. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]

Q

R

  • Rabeti, Masoud Potential of Semi-Empirical Heat Transfer Models in Predicting ‎the Effects of Equivalence Ratio on Low Temperature Reaction ‎and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
  • Rabiei, Faranak Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
  • Rafat, Mohsen A Novel Flexible Lane Changing (FLC) Method in Complicated ‎Dynamic Environment for Automated Vehicles [Volume 9, Issue 2, 2023, Pages 318-331]
  • Rajaratnam, Nallamuthu A Note on the Discharge over Full-width Rectangular Sharp-‎crested Weirs and Weirs of Finite Crest Length‎ [Volume 9, Issue 2, 2023, Pages 458-463]
  • Ranjbar, Ali Akbar Potential of Semi-Empirical Heat Transfer Models in Predicting ‎the Effects of Equivalence Ratio on Low Temperature Reaction ‎and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
  • Rashidi, Mohammad Mehdi Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
  • Ravanavard, Mehdi Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
  • Rhimini, Hassan Comparative Study of the Spectral Method, DISPERSE and Other ‎Classical Methods for Plotting the Dispersion Curves in ‎Anisotropic Plates [Volume 9, Issue 4, 2023, Pages 955-973]
  • Rizov, Victor Delamination Analysis of Multilayered Functionally Graded ‎Beams which Exhibit Non-linear Creep Behavior [Volume 9, Issue 4, 2023, Pages 935-944]
  • Rohani, Milad Numerical Simulations of Spoiler’s Effect on a Hatchback and a ‎Sedan Car Exposed to Crosswind Effect‎ [Volume 9, Issue 2, 2023, Pages 346-356]
  • Rojas, Omar S. A Nonlinear Lagrangian Model for Plane Frames Pre-design [Volume 9, Issue 3, 2023, Pages 884-899]
  • Rona, Aldo Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid ‎Nanofluid Natural Convection in a Partially Layered Porous ‎Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
  • Rusyak, Ivan G. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]

S

  • Saffarian, Mohammad Reza Numerical Simulations of Spoiler’s Effect on a Hatchback and a ‎Sedan Car Exposed to Crosswind Effect‎ [Volume 9, Issue 2, 2023, Pages 346-356]
  • Safieddin Ardebili, Seyed Mohammad Potential of Semi-Empirical Heat Transfer Models in Predicting ‎the Effects of Equivalence Ratio on Low Temperature Reaction ‎and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
  • Sahni, Manoj Effect of Magnetic Field on Viscous Flow through Composite ‎Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
  • Said, Zafar Heat Transfer Improvement in a Thermal Energy Storage System ‎using Auxiliary Fluid Instead of Nano-PCM in an Inclined ‎Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
  • Saria, Abdellali Numerical Study of the Dynamic Response of Elevated Steel ‎Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
  • Savino, Pierclaudio Two-node Curved Inverse Finite Element Formulations based on ‎Exact Strain-displacement Solution [Volume 9, Issue 1, 2023, Pages 259-273]
  • Schramm, Alexander E. Driveline Stability in Racing Motorcycles: Analysis of a Three ‎Degrees of Freedom Minimal Model [Volume 9, Issue 2, 2023, Pages 404-418]
  • Shafaghat, Rouzbeh Numerical Study of the Hydrodynamic Behavior of an Archimedes Screw Turbine by Experimental Data in order to Optimize Turbine Performance: The Genetic Algorithm [Volume 9, Issue 4, 2023, Pages 1060-1075]
  • Shafii, Mohammad Behshad Numerical Study on the Ferrofluid Droplet Splitting in a T-junction ‎with Branches of Unequal Widths using Asymmetric Magnetic Field‎ [Volume 9, Issue 2, 2023, Pages 357-370]
  • Shah, Kamal Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
  • Shahani, Amir Reza Numerical and Experimental Investigation on Post-buckling ‎Behavior of Stiffened Cylindrical Shells with Cutout subject to ‎Uniform Axial Compression [Volume 9, Issue 1, 2023, Pages 25-44]
  • Shaklein, Artem A. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
  • Shanab, Rabab A. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
  • Shariati, Mojtaba Stress-driven Approach to Vibrational Analysis of FGM Annular ‎Nano-plate based on First-order Shear Deformation Plate Theory [Volume 9, Issue 3, 2023, Pages 637-655]
  • Sheremet, Mikhail A. Influence of Thermal Radiation on Heat Transfer through a ‎Hollow Block [Volume 9, Issue 2, 2023, Pages 419-429]
  • Shimanovskiy, Vladimir Matrix Equations of the Motion of Multibody Systems with a Tree Structure in Hamiltonian Variables [Volume 9, Issue 4, 2023, Pages 1107-1121]
  • Shishehsaz, Mohammad Stress-driven Approach to Vibrational Analysis of FGM Annular ‎Nano-plate based on First-order Shear Deformation Plate Theory [Volume 9, Issue 3, 2023, Pages 637-655]
  • Shishesaz, Mohammad Reza Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
  • Shmatko, Tetyana Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
  • Shrager, Gennady R. Flow Structure when Filling a Channel with a Curable Liquid [Volume 9, Issue 1, 2023, Pages 195-204]
  • Sofiyev, Abdullah‎ H.‎ Buckling Behavior of Nanocomposite Plates with Functionally ‎Graded Properties under Compressive Loads in Elastic and ‎Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
  • Solmaz, Hamit Potential of Semi-Empirical Heat Transfer Models in Predicting ‎the Effects of Equivalence Ratio on Low Temperature Reaction ‎and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
  • Soloviev, Arcady Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based ‎on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
  • Sorrentino, Silvio Driveline Stability in Racing Motorcycles: Analysis of a Three ‎Degrees of Freedom Minimal Model [Volume 9, Issue 2, 2023, Pages 404-418]
  • Srinivas, S. Mathematical Model of Fluid Flow and Solute Transport in ‎Converging-diverging Permeable Tubes [Volume 9, Issue 4, 2023, Pages 900-914]
  • Strizhak, Pavel A. ‎2D Planar Simulation of Collisions between Liquid Droplets and ‎Solid Particles in a Gas [Volume 9, Issue 3, 2023, Pages 678-694]
  • Sysyn, Mykola Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]

T

  • Tabaza, Taha Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
  • Tadi Beni, Yaghoub Power Law Nanofluid through Tapered Artery based on a ‎Consistent Couple Stress Theory [Volume 9, Issue 3, 2023, Pages 623-636]
  • Tantawy, Rania Even and Uneven Porosities on Rotating Functionally Graded ‎Variable-thickness Annular Disks with Magneto-electro-thermo-‎mechanical Loadings [Volume 9, Issue 3, 2023, Pages 695-711]
  • Tarlakovskii, Dmitry V. Bernoulli-Euler Beam Unsteady Bending Model with ‎Consideration of Heat and Mass Transfer [Volume 9, Issue 1, 2023, Pages 168-180]
  • TEKİN, Gülçin An Alternative Procedure for Longitudinal Vibration Analysis of ‎Bars with Arbitrary Boundary Conditions [Volume 9, Issue 1, 2023, Pages 294-301]
  • Teng, Shuai A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]
  • Tikhonov, A. A. Natural Magneto-velocity Coordinate System for Satellite ‎Attitude Stabilization: Dynamics and Stability Analysis [Volume 9, Issue 2, 2023, Pages 513-520]
  • Timchenko, Galina Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
  • Tondolo, Francesco Two-node Curved Inverse Finite Element Formulations based on ‎Exact Strain-displacement Solution [Volume 9, Issue 1, 2023, Pages 259-273]
  • Topol, Heiko Bifurcation of Fiber-Reinforced Cylindrical Membranes under ‎Extension, Inflation, and Swelling [Volume 9, Issue 1, 2023, Pages 113-128]
  • Torabi, Farschad Economic Evaluation of Supplying Commercial Thermal Load by ‎a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
  • Turen, Yunus Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]

U

  • Udalov, Pavel Hemispherical Resonator of a Rate-integrating Gyroscope: A ‎Novel Method for Determination of Eigenfrequencies and ‎Eigenforms in Presence of Imperfections‎ [Volume 9, Issue 4, 2023, Pages 915-925]

V

  • Varunkumar, M. Mathematical Model of Fluid Flow and Solute Transport in ‎Converging-diverging Permeable Tubes [Volume 9, Issue 4, 2023, Pages 900-914]
  • Verma, Amit K. A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
  • Verma, Lajja A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
  • Villalba Morales, Jesus D. Shape Optimization of Slotted Steel Plate Dampers using the ‎Simulated Annealing Algorithm [Volume 9, Issue 3, 2023, Pages 870-883]

Y

  • Yaghootian, Amin Calculation of Backscattered Ultrasonic Waves Field from a ‎Copper-clad Steel Rod Immersing in Water and Effect of Clad ‎Corrosion and Interfacial Disbond between Clad and Rod Defects ‎on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
  • Yakimov, A.S. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
  • Yan, Zhaocheng A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]

Z

  • Zamani, Mohsen Numerical Study of the Hydrodynamic Behavior of an Archimedes Screw Turbine by Experimental Data in order to Optimize Turbine Performance: The Genetic Algorithm [Volume 9, Issue 4, 2023, Pages 1060-1075]
  • Zareipour, Farzaneh Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
  • Zarezadeh, Alireza Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
  • Zeighami Salimabad, Mehdi Calculation of Backscattered Ultrasonic Waves Field from a ‎Copper-clad Steel Rod Immersing in Water and Effect of Clad ‎Corrosion and Interfacial Disbond between Clad and Rod Defects ‎on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
  • Zemskov, Andrei V. Bernoulli-Euler Beam Unsteady Bending Model with ‎Consideration of Heat and Mass Transfer [Volume 9, Issue 1, 2023, Pages 168-180]
  • Zenkour, Ashraf M. Even and Uneven Porosities on Rotating Functionally Graded ‎Variable-thickness Annular Disks with Magneto-electro-thermo-‎mechanical Loadings [Volume 9, Issue 3, 2023, Pages 695-711]
  • Zhigarev, V.A. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
  • Zhou, Linghao Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
  • Zitouni, Ismaine Comparative Study of the Spectral Method, DISPERSE and Other ‎Classical Methods for Plotting the Dispersion Curves in ‎Anisotropic Plates [Volume 9, Issue 4, 2023, Pages 955-973]